Posters Telescopes and Large Optics
| Wednesday, October 10, 2018 |
| 5:00 PM - 6:00 PM |
Speaker
Attendee133
CNRS - Laboratoire d'Astrophysique De Marseille
High performance large lightweight mirrors fabrication adapted to stress-mirror polishing (SMP) technique
Attendee226
Researcher
ITRC
The design and assembly of a long-focal-length telescope with aluminum mirrors
Attendee137
CNR-IFN Padova
Study and realization of a prototype of the primary off-axis 1-m diameter aluminium mirror for the ESA ARIEL mission
Attendee211
SENER INGENIERIA Y SISTEMAS, S.A.
Electro-optical performance of the Ingenio/SEOSAT primary payload
Attendee345
Cnrs
WFIRST OAPs' fabrication : prototyping phase
Attendee348
CNR - IFN
Optical performance of the Metis coronagraph on the Solar Orbiter ESA mission
Attendee350
IRAP - CNRS
Optical alignement and inflight performances of the PILOT balloon-borne experiment
Attendee297
Associate Professor
Meisei University
On-orbit alignment and wavefront compensation of segmented aperture telescope using adaptive optics
Attendee311
Cea
TALC an annular 20m telescope, how could a rim structure relying on a central mast and spokes could be space qualified ?
Attendee137
CNR-IFN Padova
A lightweight Schmidt space telescope configuration for ultra-high energy cosmic ray detection
Attendee103
Electro-optic Scientist
Facebook
Light Weight, Athermailzed, Hybrid Composite Mirror Architecture for Large Aperture Space Optics
Attendee85
Program Manager
Lockheed Martin Space
Common Interface Visible Sensor
Attendee296
University Of New Mexico
European and US technologies enable CETUS, an ultraviolet space telescope concept
Attendee137
CNR-IFN Padova
Alignment procedure for the Gregorian telescope of the Metis coronagraph for the Solar Orbiter ESA mission
